cwr16 www.vishay.com vishay sprague revision: 31-aug-11 1 document number: 40094 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 solid tantalum surface mount capacitors t antamount ? conformal coated, extended range, military, mil-prf-55365/13 qualified features ? weibull failure rates b, c, t ? tape and reel available per eia 481 ? termination finishes available; gold plate, solder plated, and hot solder dipped ? mounting: surface mount ? compliant to rohs directive 2002/95/ec note * pb containing terminations are not rohs compliant, exemptions may apply performance characteristics operating temperature: - 55 c to + 125 c (above 85 c, voltage derating is required) capacitance range: 0.33 f to 330 f capacitance tolerance: 5 %, 10 %, 20 % voltage rating: 4 v dc to 35 v dc note (1) t level capacitors are recommen ded for space applications note ? when solder coated terminations are required, add 0.015" [0.38 mm] to termination dime nsion tolerance ordering information cwr16 d b 335 k b a a /tr type voltage termination finish capacitance capacitance tolerance failure rate %/1000 h case code surge current packaging c = 4 v d = 6 v f = 10 v h = 15 v j = 20 v k = 25 v m = 35 v b = gold h = solder plated c = hot solder dipped this is expressed in picofarads. the first two digits are the significant figures. the third is the number of zeros to follow. j = 5 % k = 10 % m = 20 % b = 0.1 c = 0.01 t = 0.01 (1) a b c d e f g h a = 10 cycles at + 25 c b = 10 cycles at - 55 c and + 85 c c = 10 cycles at - 55 c and + 85 c (before weibull grading) z = no surge current blank = bulk, plastic tray /fa = waffle pack /pr = 100 pcs reel /hr = half reel /tr = full reel dimensions in inches [millimeters] case code l w h p t 1 t 2 (max.) a 0.100 0.015 [2.54 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.030 0.005 [0.76 0.13] 0.005 [0.13] 0.015 [0.38] b 0.150 0.015 [3.81 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.030 0.005 [0.76 0.13] 0.005 [0.13] 0.015 [0.38] c 0.200 0.015 [5.08 0.38] 0.050 0.015 [1.27 0.38] 0.050 0.015 [1.27 0.38] 0.030 0.005 [0.76 0.13] 0.005 [0.13] 0.015 [0.38] d 0.150 0.015 [3.81 0.38] 0.100 0.015 [2.54 0.38] 0.050 0.015 [1.27 0.38] 0.030 0.005 [0.76 0.13] 0.005 [0.13] 0.015 [0.38] e 0.200 0.015 [5.08 0.38] 0.100 0.015 [2.54 0.38] 0.050 0.015 [1.27 0.38] 0.030 0.005 [0.76 0.13] 0.005 [0.13] 0.015 [0.38] f 0.220 0.015 [5.59 0.38] 0.135 0.015 [3.43 0.38] 0.070 0.015 [1.78 0.38] 0.030 0.005 [0.76 0.13] 0.005 [0.13] 0.015 [0.38] g 0.265 0.015 [6.73 0.38] 0.110 0.015 [2.79 0.38] 0.110 0.015 [2.79 0.38] 0.050 0.005 [1.27 0.13] 0.005 [0.13] 0.015 [0.38] h 0.285 0.015 [7.24 0.38] 0.150 0.015 [3.81 0.38] 0.110 0.015 [2.79 0.38] 0.050 0.005 [1.27 0.13] 0.005 [0.13] 0.015 [0.38] w l t 1 p h p t 2 (max.) weld and dimple projection identies anode (+) terminal -+
cwr16 www.vishay.com vishay sprague revision: 31-aug-11 2 document number: 40094 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and case codes f 4 v 6 v 10 v 15 v 20 v 25 v 35 v 0.33 a 0.47 a 0.68 a 1.0 a a b 1.5 a b 2.2 a a b d 3.3aaabde 4.7 a a b, c b, c, d e 6.8 a b b, c, d d, e e f g 10 b b b, c, d, e d, e e, f h 15 b b, d, e d, e e, f f g h 22 b, d d, e e f g g, h 33 d, e e f f, g h h 47 e f f, g g, h h 68 e f, g g g, h 100 f g g, h h 150 g g h 220 h h h 330 h h standard ratings capacitance (f) case code part number max. dcl (a) at max. df (%) at max. esr at + 25 c 100 khz ( ? ) + 25 c + 85 c + 125 c + 25 c + 85 c + 125 c - 55 c 4 v dc at + 85 c; 2.7 v dc at + 125 c 3.3 a cwr16c(1)335(2)(3)a(4)(5) 1 10 12 6 8 8 12 4.7 a cwr16c(1)475(2)(3)a(4)(5) 1 10 12 6 8 8 12 6.8 a cwr16c(1)685(2)(3)a(4)(5) 1 10 12 6 8 8 12 10 b cwr16c(1)106(2)(3)b(4)(5) 1 10 12 8 10 10 8 15 b cwr16c(1)156(2)(3)b(4)(5) 1 10 12 8 10 10 8 22 b cwr16c(1)226(2)(3)b(4)(5) 1 10 12 8 10 10 8 22 d cwr16c(1)226(2)(3)d(4)(5) 1 10 12 8 10 12 4 33 d cwr16c(1)336(2)(3)d(4)(5) 2 20 24 8 10 12 4 33 e cwr16c(1)336(2)(3)e(4)(5) 2 20 24 8 10 12 3 47 e cwr16c(1)476(2)(3)e(4)(5) 2 20 24 8 10 12 3 68 e cwr16c(1)686(2)(3)e(4)(5) 3 30 36 8 10 12 3 100 f cwr16c(1)107(2)(3)f(4)(5) 4 40 48 10 12 12 2 150 g cwr16c(1)157(2)(3)g(4)(5) 6 60 72 10 12 12 1 220 h cwr16c(1)227(2)(3)h(4)(5) 8 80 96 10 12 12 1 330 h cwr16c(1)337(2)(3)h(4)(5) 10 100 120 10 12 12 0.9 note ? part number definitions: (1) termination finish: b, c, h (2) capacitance tole rance: j, k, m (3) failure rate: b, c, t (4) surge current: a, b, c, z (5) packaging: blank, /fa, /hr, /pr, /tr
cwr16 www.vishay.com vishay sprague revision: 31-aug-11 3 document number: 40094 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 6 v dc at + 85 c; 4 v dc at + 125 c 3.3 a cwr16d(1)335(2)(3)a(4)(5) 1 10 12 6 8 8 12 4.7 a cwr16d(1)475(2)(3)a(4)(5) 1 10 12 6 8 8 12 6.8 b cwr16d(1)685(2)(3)b(4)(5) 1 10 12 6 8 8 8 10 b cwr16d(1)106(2)(3)b(4)(5) 1 10 12 6 8 8 8 15 b cwr16d(1)156(2)(3)b(4)(5) 1 10 12 8 10 10 8 15 d cwr16d(1)156(2)(3)d(4)(5) 1 10 12 8 10 12 5 15 e cwr16d(1)156(2)(3)e(4)(5) 1 10 12 8 10 12 3 22 d cwr16d(1)226(2)(3)d(4)(5) 1 10 12 6 8 8 5 22 e cwr16d(1)226(2)(3)e(4)(5) 2 20 24 8 10 12 3.5 33 e cwr16d(1)336(2)(3)e(4)(5) 2 20 24 6 8 8 3.5 47 f cwr16d(1)476(2)(3)f(4)(5) 3 30 36 8 10 12 3.5 68 f cwr16d(1)686(2)(3)f(4)(5) 4 40 48 10 12 12 1.5 68 g cwr16d(1)686(2)(3)g(4)(5) 4 40 48 10 12 12 1 100 g cwr16d(1)107(2)(3)g(4)(5) 6 60 72 10 12 12 1.1 150 g cwr16d(1)157(2)(3)g(4)(5) 10 100 120 10 12 12 1.1 220 h cwr16d(1)227(2)(3)h(4)(5) 10 100 120 10 12 12 0.9 330 h cwr16d(1)337(2)(3)h(4)(5) 20 200 240 10 12 12 0.9 10 v dc at + 85 oc; 7 v dc at + 125 oc 2.2 a cwr16f(1)225(2)(3)a(4)(5) 1 10 12 6 8 8 12 3.3 a cwr16f(1)335(2)(3)a(4)(5) 1 10 12 6 8 8 12 4.7 b cwr16f(1)475(2)(3)b(4)(5) 1 10 12 6 8 8 8 4.7 c cwr16f(1)475(2)(3)c(4)(5) 1 10 12 6 8 8 5.5 6.8 b cwr16f(1)685(2)(3)b(4)(5) 1 10 12 6 8 8 8 6.8 c cwr16f(1)685(2)(3)c(4)(5) 1 10 12 6 8 8 5.5 6.8 d cwr16f(1)685(2)(3)d(4)(5) 1 10 12 6 8 8 5 10 b cwr16f(1)106(2)(3)b(4)(5) 1 10 12 8 10 10 8 10 c cwr16f(1)106(2)(3)c(4)(5) 1 10 12 6 8 8 5.5 10 d cwr16f(1)106(2)(3)d(4)(5) 1 10 12 6 8 8 4 10 e cwr16f(1)106(2)(3)e(4)(5) 1 10 12 6 8 8 3.5 15 d cwr16f(1)156(2)(3)d(4)(5) 1 10 12 6 8 8 5 15 e cwr16f(1)156(2)(3)e(4)(5) 2 20 24 8 10 10 3 22 e cwr16f(1)226(2)(3)e(4)(5) 3 30 36 8 10 10 2 33 f cwr16f(1)336(2)(3)f(4)(5) 3 30 36 8 10 10 1.5 47 f cwr16f(1)476(2)(3)f(4)(5) 4 40 48 10 12 12 1.5 47 g cwr16f(1)476(2)(3)g(4)(5) 4 40 48 10 12 12 1 68 g cwr16f(1)686(2)(3)g(4)(5) 6 60 72 10 12 12 1.1 100 g cwr16f(1)107(2)(3)g(4)(5) 10 100 120 10 12 12 1.1 100 h cwr16f(1)107(2)(3)h(4)(5) 10 100 120 10 12 12 0.9 150 h cwr16f(1)157(2)(3)h(4)(5) 15 150 180 10 12 12 0.9 220 h cwr16f(1)227(2)(3)h(4)(5) 20 200 240 10 12 12 0.9 standard ratings capacitance (f) case code part number max. dcl (a) at max. df (%) at max. esr at + 25 c 100 khz ( ? ) + 25 c + 85 c + 125 c + 25 c + 85 c + 125 c - 55 c note ? part number definitions: (1) termination finish: b, c, h (2) capacitance tole rance: j, k, m (3) failure rate: b, c, t (4) surge current: a, b, c, z (5) packaging: blank, /fa, /hr, /pr, /tr
cwr16 www.vishay.com vishay sprague revision: 31-aug-11 4 document number: 40094 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 15 v dc at + 85 oc; 10 v dc at + 125 oc 1.0 a cwr16h(1)105(2)(3)a(4)(5) 1 10 12 6 8 8 15 1.5 a cwr16h(1)155(2)(3)a(4)(5) 1 10 12 6 8 8 15 2.2 a cwr16h(1)225(2)(3)a(4)(5) 1 10 12 6 8 8 15 3.3 b cwr16h(1)335(2)(3)b(4)(5) 1 10 12 6 8 8 9 4.7 b cwr16h(1)475(2)(3)b(4)(5) 1 10 12 6 8 8 5 4.7 c cwr16h(1)475(2)(3)c(4)(5) 1 10 12 6 8 8 5.5 4.7 d cwr16h(1)475(2)(3)d(4)(5) 1 10 12 6 8 8 6 6.8 d cwr16h(1)685(2)(3)d(4)(5) 1 10 12 6 8 8 6 6.8 e cwr16h(1)685(2)(3)e(4)(5) 1 10 12 8 10 12 3 10 d cwr16h(1)106(2)(3)d(4)(5) 2 20 24 6 8 8 6 10 e cwr16h(1)106(2)(3)e(4)(5) 2 20 24 6 8 8 4 15 e cwr16h(1)156(2)(3)e(4)(5) 2 20 24 6 8 8 4 15 f cwr16h(1)156(2)(3)f(4)(5) 2 20 24 8 10 10 3 22 f cwr16h(1)226(2)(3)f(4)(5) 3 30 36 8 10 10 3 33 f cwr16h(1)336(2)(3)f(4)(5) 5 50 60 6 8 8 3 33 g cwr16h(1)336(2)(3)g(4)(5) 6 60 72 8 10 10 1.1 47 g cwr16h(1)476(2)(3)g(4)(5) 10 100 120 8 10 10 1.1 47 h cwr16h(1)476(2)(3)h(4)(5) 10 100 120 8 10 10 0.9 68 g cwr16h(1)686(2)(3)g(4)(5) 10 100 120 8 10 10 1.1 68 h cwr16h(1)686(2)(3)h(4)(5) 10 100 120 8 10 10 0.9 100 h cwr16h(1)107(2)(3)h(4)(5) 15 150 180 10 12 12 0.9 20 v dc at + 85 oc; 13 v dc at + 125 oc 0.68 a cwr16j(1)684(2)(3)a(4)(5) 1 10 12 6 8 8 15 1.0 a cwr16j(1)105(2)(3)a(4)(5) 1 10 12 6 8 8 15 1.5 b cwr16j(1)155(2)(3)b(4)(5) 1 10 12 6 8 8 9 2.2 b cwr16j(1)225(2)(3)b(4)(5) 1 10 12 6 8 8 9 3.3 d cwr16j(1)335(2)(3)d(4)(5) 1 10 12 6 8 8 6 4.7 e cwr16j(1)475(2)(3)e(4)(5) 1 10 12 6 8 8 6 6.8 e cwr16j(1)685(2)(3)e(4)(5) 2 20 24 6 8 8 5 10 e cwr16j(1)106(2)(3)e(4)(5) 2 20 24 6 8 8 5 10 f cwr16j(1)106(2)(3)f(4)(5) 2 20 24 6 8 8 3 15 f cwr16j(1)156(2)(3)f(4)(5) 3 30 36 6 8 8 3 22 g cwr16j(1)226(2)(3)g(4)(5) 4 40 48 8 10 10 2.5 33 h cwr16j(1)336(2)(3)h(4)(5) 6 60 72 8 10 10 0.9 47 h cwr16j(1)476(2)(3)h(4)(5) 10 100 120 8 10 10 0.9 25 v dc at + 85 oc; 17 v dc at + 125 oc 0.47 a cwr16k(1)474(2)(3)a(4)(5) 1 10 12 6 8 8 15 1.0 b cwr16k(1)105(2)(3)b(4)(5) 1 10 12 6 8 8 10 2.2 d cwr16k(1)225(2)(3)d(4)(5) 1 10 12 6 8 8 6 3.3 e cwr16k(1)335(2)(3)e(4)(5) 1 10 12 6 8 8 4 6.8 f cwr16k(1)685(2)(3)f(4)(5) 2 20 24 6 8 8 3 15 g cwr16k(1)156(2)(3)g(4)(5) 4 40 48 6 8 8 1.4 22 g cwr16k(1)226(2)(3)g(4)(5) 6 60 72 6 8 8 1.4 22 h cwr16k(1)226(2)(3)h(4)(5) 6 60 72 6 8 8 0.9 33 h cwr16k(1)336(2)(3)h(4)(5) 10 100 120 8 10 10 0.9 35 v dc at + 85 oc, 23 v dc at + 125 oc 0.33 a cwr16m(1)334(2)(3)a(4)(5) 1 10 12 6 8 8 22 6.8 g cwr16m(1)685(2)(3)g(4)(5) 3 30 36 6 8 8 1.5 10 h cwr16m(1)106(2)(3)h(4)(5) 4 40 48 8 10 10 0.9 15 h cwr16m(1)156(2)(3)h(4)(5) 6 60 72 6 8 8 0.9 standard ratings capacitance (f) case code part number max. dcl (a) at max. df (%) at max. esr at + 25 c 100 khz ( ? ) + 25 c + 85 c + 125 c + 25 c + 85 c + 125 c - 55 c note ? part number definitions: (1) termination finish: b, c, h (2) capacitance tole rance: j, k, m (3) failure rate: b, c, t (4) surge current: a, b, c, z (5) packaging: blank, /fa, /hr, /pr, /tr
cwr16 www.vishay.com vishay sprague revision: 31-aug-11 5 document number: 40094 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? metric dimensions will govern. dimensio ns in inches are rounded and for reference only. (1) a 0 , b 0 , k 0 , are determined by the maximum dimensions to the ends of the terminals extending from the component bo dy and/or the body dimensions of the component. the clearance between the ends of the terminals or body of the co mponent to the sides and depth of the cavity (a 0 , b 0 , k 0 ) must be within 0.002" (0.05 mm) minimum and 0.020" (0. 50 mm) maximum. the clearance allowed must also prevent rotation of the component within the cavity of not more than 20. (2) tape with components shall pass around ra dius r without damage. the minimum trailer length may require addi tional length to p rovide r minimum for 12 mm embossed tape for reels with hub diameters approaching n minimum. (3) this dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between th e embossed cavities or to the edge of the cavity whichever is less. (4) this dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier tape between the embossed ca vity or to the edge of th e cavity whichever is less. (5) the embossed hole location shall be measured from the sprocket hole controlling the location of the embossement. dimensions of embossement location shall be a pplied independent of each other. (6) b 1 dimension is a refere nce dimension tape feeder clearance only. tape and reel packaging in inches [millimeters] tape and reel specifications: all case sizes are available on plastic em bossed tape per eia-481. standard reel diamet er is 7" (178 mm). carrier tape dimensions in inches [millimeters] case code tape size b 1 (max.) d 1 (min.) f p 1 t 2 (max.) w a 8 mm 0.179 [4.55] 0.039 [1.0] 0.138 0.002 [3.5 0.05] 0.157 0.004 [4.0 0.1] 0.098 [2.5] 0.315 0.004 [8.0 0.10] b, c, d, e 12 mm 0.323 [8.2] 0.059 [1.5] 0.217 0.002 [5.5 0.05] 0.157 0.004 [4.0 0.1] 0.256 [6.5] 0.472 0.012 [12.0 0.30] f 12 mm double pitch 0.323 [8.2] 0.059 [1.5] 0.217 0.002 [5.5 0.05] 0.315 0.004 [8.0 0.10] 0.256 [6.5] 0.472 0.012 [12.0 0.30] g, h 16 mm 0.476 [12.1] 0.059 [1.5] 0.295 0.004 [7.5 0.1] 0.315 0.004 [8.0 0.10] 0.315 [8.0] 0.642 max. [16.3] max. 0.004 [0.10] max. k 0 t 2 (max.) b 1 (max.) (6) 0.024 [0.600] max. 10 pitches cumulative tolerance on tape 0.008 [0.200] embossment 0.069 0.004 [1.75 0.10] d 1 (min.) for components 0.079 x 0.047 [2.0 x 1.2] and larger (5) . maximum user direction of feed center lines of cavity a 0 p 1 f w 0.030 [0.75] min. (3) 0.030 [0.75] min. (4) 0.079 0.002 [2.0 0.05] 0.157 0.004 [4.0 0.10] 0.059 + 0.004 - 0.0 [1.5 + 0.10 - 0.0] b 0 maximum component rotation (side or front sectional view) 20 for tape feeder reference only including draft. concentric around b 0 deformation between embossments to p cover tape to p cover tape cavity size (1) direction of feed cathode (-) anode (+) bending radius (2) r minimum: 8 mm = 0.984" (25 mm) 12 mm and 16 mm = 1.181" (30 mm) r min. 20 maximum component rotation typical component cavity center line typical component center line a 0 b 0 (top view) 0.9843 [250.0] tape 3.937 [100.0] 0.039 [1.0] max. 0.039 [1.0] max. camber allowable camber to be 0.039/3.937 [1/100] (top view) non-cumulative over 9.843 [250.0]
cwr16 www.vishay.com vishay sprague revision: 31-aug-11 6 document number: 40094 for technical ques tions, contact: tantalum@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes ? bulk capacitors are sh ipped in plastic trays ? t level capacitors are only shipped in tape and reel/or wa ffle packaging. contact factory for waffle pack quantities. standard packaging quantity case code quantity (pcs/reel) bulk, plastic tray quantity (pcs) 7", full reel (/tr) 7", half reel (/hr) 7", partial reel (/pr) a, b, c, d, e 2500 1250 100 75 f 1000 500 100 75 g 600 300 100 60 h 600 300 100 50 pad dimensions in inches [millimeters] case code width (a) pad metallization (b) separation (c) a 0.065 [1.6] 0.50 [1.3] 0.040 [1.0] b 0.065 [1.6] 0.70 [1.8] 0.055 [1.4] c 0.065 [1.6] 0.70 [1.8] 0.120 [3.0] d 0.115 [2.9] 0.70 [1.8] 0.070 [1.8] e 0.115 [2.9] 0.70 [1.8] 0.120 [3.0] f 0.150 [3.8] 0.70 [1.8] 0.140 [3.6] g 0.125 [3.2] 0.70 [1.8] 0.170 [4.3] h 0.165 [4.2] 0.90 [2.3] 0.170 [4.3] power dissipation case code maximum permissible power di ssipation at + 25 c (w) in free air a 0.060 b, c 0.075 d, e 0.085 f 0.110 g 0.120 h 0.150 a c b b
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
